Table des matières
Installation système
Configuration RAID matériel
Faire F8 au démarrage pour lancer “iLO”, quitter “iLO” et refaire F8 (
) pour entrer dans l'utilitaire de configuration RAID.
Créer un RAID 1+0 pour le système avec les disques 1 et 2.
Installation de Debian
Pas de soucis particulier, ça boot sur USB.
Configuration ZFS
Matériel
Il faut créer 1 volume logique par disque (RAID 0) dans l'utilitaire de gestion RAID.
Ensuite, pour gérer depuis debian, ajouter de dépôt de HP et la clé qui va bien :
# echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp bionic/current non-free" >> /etc/apt/sources.list # curl http://vibsdepot.hpe.com/hpePublicKey.pub | apt-key add - OK # apt-update ... # apt install ssacli
Avec l'utilitaire ssacli, on peut voir la configuration du contrôleur RAID matériel :
=> controller all show config
Smart Array P410 in Slot 3 (sn: PACCRID1120126H)
DL18xG6BP at Port 1I, Box 1, OK
Port Name: 1I
Port Name: 2I
Array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (558.88 GB, RAID 1, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 600 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS HDD, 600 GB, OK)
Array B (SAS, Unused Space: 0 MB)
logicaldrive 2 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS HDD, 600 GB, OK)
Array C (SAS, Unused Space: 0 MB)
logicaldrive 3 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS HDD, 600 GB, OK)
Array D (SAS, Unused Space: 0 MB)
logicaldrive 4 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS HDD, 600 GB, OK)
Array E (SAS, Unused Space: 0 MB)
logicaldrive 5 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS HDD, 600 GB, OK)
Array F (SAS, Unused Space: 0 MB)
logicaldrive 6 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS HDD, 600 GB, OK)
Array G (SAS, Unused Space: 0 MB)
logicaldrive 7 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS HDD, 600 GB, OK)
Array H (SAS, Unused Space: 0 MB)
logicaldrive 8 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:9 (port 1I:box 1:bay 9, SAS HDD, 600 GB, OK)
Array I (SAS, Unused Space: 0 MB)
logicaldrive 9 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:10 (port 1I:box 1:bay 10, SAS HDD, 600 GB, OK)
Array J (SAS, Unused Space: 0 MB)
logicaldrive 10 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:11 (port 1I:box 1:bay 11, SAS HDD, 600 GB, OK)
Array K (SAS, Unused Space: 0 MB)
logicaldrive 11 (558.88 GB, RAID 0, OK)
physicaldrive 1I:1:12 (port 1I:box 1:bay 12, SAS HDD, 600 GB, OK)
Enclosure SEP (Vendor ID HP, Model DL18xG6BP) 248 (WWID: 5001438013CAE7B3, Port: 1I, Box: 1)
Expander 250 (WWID: 5001438013CAE7A0, Port: 1I, Box: 1)
SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 249 (WWID: 50014380146544CF)
Création du zpool
Installation de ZFS
Pour ZFS sur Debian, il faut ajouter les dépôts contrib et les backports (https://wiki.debian.org/ZFS#Installation) puis :
apt install linux-headers-`uname -r` apt install -t buster-backports dkms spl-dkms modprobe zfs echo "zfs" >> /etc/modules-load.d/modules.conf apt install -t buster-backports zfs-dkms zfsutils-linux
Création du ZPOOL
# zpool create proxmox-vm raidz2 scsi-3600508b1001c275fe0d7d76bb0ba8880 scsi-3600508b1001c491ce324a249074009c1 scsi-3600508b1001c676738ce3e53b30dffa6 scsi-3600508b1001c703f1382e3b4ea517541 scsi-3600508b1001c8ad367bb2e8a134cbf36 scsi-3600508b1001c8e548f2c854a7cb6a650 scsi-3600508b1001c9227adce3d39d01e6f01 scsi-3600508b1001ca0b7f382069127921c26 # zpool add proxmox-vm spare scsi-3600508b1001ce6b930ef2926c40585db # zpool add proxmox-vm spare scsi-3600508b1001cf48d2991474b4eeb7187
Visualisation du ZPOOL
# zpool list NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT proxmox-vm 4.36T 333K 4.36T - - 0% 0% 1.00x ONLINE -
Statut du ZPOOL
# zpool status
pool: proxmox-vm
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
proxmox-vm ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
scsi-3600508b1001c275fe0d7d76bb0ba8880 ONLINE 0 0 0
scsi-3600508b1001c491ce324a249074009c1 ONLINE 0 0 0
scsi-3600508b1001c676738ce3e53b30dffa6 ONLINE 0 0 0
scsi-3600508b1001c703f1382e3b4ea517541 ONLINE 0 0 0
scsi-3600508b1001c8ad367bb2e8a134cbf36 ONLINE 0 0 0
scsi-3600508b1001c8e548f2c854a7cb6a650 ONLINE 0 0 0
scsi-3600508b1001c9227adce3d39d01e6f01 ONLINE 0 0 0
scsi-3600508b1001ca0b7f382069127921c26 ONLINE 0 0 0
spares
scsi-3600508b1001ce6b930ef2926c40585db AVAIL
scsi-3600508b1001cf48d2991474b4eeb7187 AVAIL
errors: No known data errors
Configuration iSCSI
Particularité Proxmox
–> https://pve.proxmox.com/wiki/Storage:_ZFS_over_iSCSI (configuration pour SSH)
Divers
- L'espace restant sur les disques “systèmes”, en RAID 1 matériel : j'ai créé une partition “data” en XFS pour poser les images des distributions, les templates de VM, …, partagé en NFS.
Identification des disques
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3PE, Ref HUS156060VLS600, PN 0B24473, SN JZXLHNZJ
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3BJ, Ref HUS156060VLS600, PN 0B24473, SN JZXR296J
- Model EF0600FARNA, PN 516810-003, CT 2ARNA01332K0RF, Ref ST3600057SS, PN 9FN066-035, SN 6SL3SNVN
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3OS, Ref HUS156060VLS600, PN 0B24473, SN JZXPET7J
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3O7, Ref HUS156060VLS600, PN 0B24473, SN JZXPHD3J
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3NH, Ref HUS156060VLS600, PN 0B24473, SN JZXMARYJ
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S40G, Ref HUS156060VLS600, PN 0B24473, SN JZXR2LJJ
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3CB, Ref HUS156060VLS600, PN 0B24473, SN JZXPEKVJ
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S40Y, Ref HUS156060VLS600, PN 0B24473, SN JZXR2R1J
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3ZS, Ref HUS156060VLS600, PN 0B24473, SN JZXLHXKJ
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3CW, Ref HUS156060VLS600, PN 0B24473, SN JZW664XJ
- Model EF0600FATFF, PN 533871-003, CT 2ATFF01EG0S3B3, Ref HUS156060VLS600, PN 0B24473, SN JZW6638J